You are here

2017 KAWASAKI MULE™ PRO SIDE X SIDES

Kawasaki MULE PRO side x sides feature a full lineup of vehicles to meet your ranch needs

2017.kawasaki.mule-pro-fxt.black.front-left.studio.jpg
The Kawasaki MULE PRO series features the fastest and most powerful MULE side x side ever built. With a wide variety of models available, the MULE PRO series is perfect for any ranch, job site, farm or fleet as well as time on trail. They provide side x side versatility with either a 812cc three-cylinder fuel injected DFI
® gasoline engine that delivers a class-leading 48 lb-ft of torque, or a 993cc three-cylinder diesel engine that has relentless torque when you have to haul or tow all day long. Power from the engine is passed through a precisely tuned Continuously Variable Transmission (CVT) with an electrically selectable 2WD/4WD system and dual-mode locking rear differential, giving the driver control in any condition.

The side x side is built with a tough chassis that provides a smooth ride through the use of independent suspension front and rear. The suspension provides a generous 8.7” of travel and excellent ground clearance allowing the vehicle to traverse most terrain.

The MULE PRO series takes full advantage of Kawasaki’s speed-sensitive Electric Power Steering (EPS) system on nearly all of its models. It reduces steering effort at low speeds, and provides optimal steering feedback to enhance handling as speed increases. The EPS helps to reduce bump steer on rough terrain, reducing driver fatigue and helping the driver enjoy a tight 16ft turning radius.

One of the main features of the MULE PRO series is its versatile Trans Cab™ seating system, available on the MULE PRO-FXT™ and MULE PRO-DXT™ models. The Trans Cab system leads the industry with its 1:1:1 seating conversion system, allowing one person to convert the seating configuration from three- to six- passengers with one trip around the vehicle in about a minute. This means the MULE can expand its cargo capacity, carrying up to 1000 pounds (600 pounds maximum in California) in the three-passenger mode and up to 350 pounds in the six-passenger configuration. Both the MULE PRO FX™ and MULE PRO DX™ models feature the largest cargo bed in their class (54.1in x 53.3in. x11in) and are able to accommodate a standard size wooden pallet (48in.x40in.) giving the vehicle more versatility. Built Kawasaki Strong, all of the MULE PRO cargo beds have a diamond-plate, steel cargo bed floor as well as a gas-assisted tilt feature that allows the user the ability to clean the cargo bed floor and easier access to the engine compartment. The tailgate is secured by two latches, making it easier to open and close. The cargo bed walls are designed with slots to accommodate cargo bed dividers and are topped by the KQR™ rail system with quick release capabilities to allow for quick and easy mounting of KQR accessories.

The driver and all passengers will experience a comfortable premium feel with the MULE’s plush front and rear bench seats, that are easy to get on and off of with ample space and three-point seatbelts for all passengers in the cabin. A multi-function LCD instrument cluster provides a large, easy-to-read display including speedometer, odometer, hour meter, fuel gauge, dual trip meters, 2WD/4WD indicators, and clock and much more to keep the driver informed.

The MULE PRO series of side x sides all have a ROPS (Roll Over Protection Structure) system as well as a 2” receiver hitch to tow up to 2,000 lb with the optional draw bar. These add to the versatility and functionality of the durable Kawasaki vehicle, which also comes with a standard Kawasaki STRONG three-year limited warranty

The MULE PRO series vehicles have integrated inner wheel wells to help keep mud and debris out of the engine compartment, protecting its components. The electrical equipment is also mounted high in the vehicle to keep it away from water, and the fuel tank is centrally mounted away from the wheels to reduce the risk of damage from debris thrown up by the tires. Additionally, steel side guards help reduce the effects of side impacts.

Various maintenance covers to provide quick and easy access to the key service areas on the vehicle. They allow the user to check the oil level, service the air cleaner, check fuses as well as access the battery and ECU connection.

Potential buyers will be happy to see the steel front bumper and steel cargo bed. These crucial parts provide greater durability and strength, keeping the MULE PRO series Kawasaki STRONG.

Customers can choose from more than 60 Kawasaki Genuine Accessories made specifically for the MULE PRO series including a hard cab enclosure, soft cab enclosure, windshield, winch, brush guard, rear view mirror, skid plates, cargo bed extender and sound system. Consumers interested to see how their new MULE PRO series side x side will look with Kawasaki Genuine Accessories installed can build their vehicle online, adding their favorite accessories and seeing what they look installed on the vehicle. They can print or save their custom build list and take it to their local Kawasaki dealer to purchase the vehicle with the specifications they selected. Visit www.kawasaki.com for full details.

Customers can take pride in the knowledge that the entire MULE PRO series is assembled from foreign and domestic components right here in Lincoln, Nebraska.

Adding to the appeal of the MULE PRO series is Kawasaki’s commitment to keep you running STRONG with our standard Kawasaki STRONG Three-Year Limited Warranty.

Both the MULE PRO gasoline and diesel model lineups offer multiple trim levels. The standard MULE PRO-FXT and the MULE PRO-FX are available without Electronic Power Steering, but do come standard with steel wheels, 26” Duro tires and a high-capacity 60.8 amp alternator that provides superior charging output via two DC outlets in the front cab. Both are available in Super Black.

The MULE PRO-FXT EPS and MULE PRO-FX EPS come with everything on the standard models, and include Electric Power Steering and a tilt steering wheel that has up to 40 degrees of adjustment depending on the model. The EPS models are available in Timberline Green and new for 2017, Vibrant Blue.

The next step up is the MULE PRO-FXT EPS LE and MULE PRO-FX EPS LE, which feature the same standard features of the EPS models with the addition of two auxiliary LED headlights for maximum visibility in low-light scenarios, stylish 12-inch six-spoke lightweight aluminum wheels, a composite sun top for occupant protection from the elements, dressed up graphics, as well as two additional DC charging outlets for rear-seat passengers (MULE PRO-FXT EPS LE). The EPS LE models are available in Super Black and Firecracker Red.2017.kawasaki.mule-pro-dx-eps-diesel.green.front-left.studio.jpg

For the consumer looking to blend into their surroundings, Kawasaki also offers the MULE PRO-FXT EPS CAMO and the MULE PRO-FX EPS CAMO models that come in Realtree Xtra® Green with scratch resistance and include EPS, tilt steering and two Auxiliary LED headlights.

The MULE PRO-FXT also features an additional trim level: the MULE PRO-FXT Ranch Edition, which features all of the standard equipment from the MULE PRO-FXT EPS LE and adds two-tone padded embossed logo seats, a winch with remote control, special badging and Metallic Titanium painted bodywork.

The MULE PRO-DXT and MULE PRO-DX are available in three trim levels. The MULE PRO-DXT and MULE PRO-DX come standard with steel wheels, a tilt steering wheel and two DC outlets in the cab and are available in Super Black. The MULE PRO-DXT EPS and MULE PRO-DX EPS add Electronic Power Steering and contrasting color graphics along the hood, doors and cargo bed in Timberline Green.

The MULE PRO-DXT EPS LE and MULE PRO-DX ESP LE include all the aforementioned equipment and add auxiliary LED headlights and a composite sun top. The EPS LE models are available in Dark Royal Red.


KAWASAKI MULE PRO-FXT™

Color: Super Black 

MSRP: $12,999

Availability: Now


KAWASAKI MULE PRO-FXT™ EPS

Color: Timberline Green, Vibrant Blue

MSRP: $14,799

Availability: Now


KAWASAKI MULE PRO-FXT™ EPS LE

Colors: Super Black, Firecraker Red

MSRP: $16,099

Availability: Now


KAWASAKI MULE PRO-FXT™ EPS CAMO

Colors: Realtree Xtra® Green Camo

MSRP: $16,099

Availability: Now


KAWASAKI MULE PRO-FXT™ Ranch Edition

Colors: Metallic Titanium

MSRP: $16,999

Availability: Now


MULE PRO-DXT™

Colors: Super Black

MSRP: $14,199

Availability: Now


MULE PRO-DXT™ EPS

Colors: Timberline Green

MSRP: $14,999

Availability: Now


MULE PRO-DXT™ EPS LE

Colors: Dark Royal Red

MSRP: $15,899

Availability: Now


MULE PRO-FX™

Colors: Super Black

MSRP: $11,999

Availability: Now  


MULE PRO-FX™ EPS

Colors: Timberline Green, Vibrant Blue

MSRP: $12,999

Availability: Now

MULE PRO-FX™ EPS LE.

Colors: Super Black, Firecracker Red

MSRP: $14,199

Availability: Now


MULE PRO-FX™ EPS CAMO

Colors: Realtree Xtra® Green Camo

MSRP: $14,199

Availability: Now


MULE PRO-DX

Colors: Super Black

MSRP: $13,199

Availability: Now


MULE PRO-DX EPS

Colors: Timberline Green

MSRP: $13,999

Availability: Now


MULE PRO-DX EPS LE

Colors: Dark Royal Red

MSRP: $14,899

Availability: Now

To download high-resolution images, log on or register for the Kawasaki media site at http://kawasakimedia.com.


ABOUT KAWASAKI

Kawasaki Heavy Industries, Ltd. (KHI) started full-scale production of motorcycles over a half century ago. The first Kawasaki motorcycle engine was designed based on technical know-how garnered from the development and production of aircraft engines, and Kawasaki’s entry into the motorcycle industry was driven by the company’s constant effort to develop new technologies. Numerous new Kawasaki models introduced over the years have helped shape the market, and in the process have created enduring legends based on their unique engineering, power, design and riding pleasure. In the future, Kawasaki's commitment to maintaining and furthering these strengths will surely give birth to new legends.

Kawasaki Motors Corp., U.S.A. (KMC) markets and distributes Kawasaki motorcycles, ATVs, side x sides, and Jet Ski® watercraft through a network of approximately 1,100 independent retailers, with close to an additional 7,700 retailers specializing in general purpose engines. KMC and its affiliates employ nearly 3,100 people in the United States, with approximately 300 of them located at KMC's Irvine, California headquarters.


Kawasaki’s tagline, “Let the good times roll. ®”, Is recognized worldwide. The Kawasaki brand is synonymous with powerful, stylish and category-leading vehicles. Information about Kawasaki’s complete line of powersports products and Kawasaki affiliates can be found on the Internet at www.kawasaki.com.









 
















 




















































Organization:

Support our site we are a Amazon Affiliate partner.