The KFI ATV plow system is engineered as a Mid-Mount System that transfers the forces from plowing to your ATV’s frame where it belongs.

The KFI ATV plow system is engineered as a Mid-Mount System that transfers the forces from plowing to your ATV’s frame where it belongs.

                                    

Proudly made in the USA, The KFI ATV Pro-Series Plow System is designed from the ground up to have all the best features in one complete package.  It’s engineered to outperform and out last the competition.  All of our plow components are shot blasted and powder coated tough for the best finish available. 

Our KFI ATV plow system is engineered as a Mid-Mount System that transfers the forces from plowing to your ATV’s frame where it belongs.

The KFI UTV Pro-Series system is designed to have all the same great features as our ATV system with additional strengthening to withstand the forces of larger UTV’s.  The KFI UTV plow system is engineered as a Front-Mount System that transfers the forces from plowing to the front lower frame.  The system is attached in seconds using two standard 5/8” hitch pins.  With this Front Mount System you will get 30+ inches of lift height!  Our Heavy-Duty 11ga 66” and 72” wide UTV Blade comes standard with a 7” top rubber snow flap, Heavy-Duty Skid Pads, two-sided 3/16” grade 50 wear bar, and added gusseting for increased strength to handle the wider width and force of your UTV.

KFI Pro-Series Straight Blades

Specifications:

MADE in the USA

Available in ATV 54” and 60” and UTV 72”

11GA Steel Blade

3/16” Grade 50 steel gusseting

Shot Blasted before powder coating

Powder Coated TOUGH – Metallic Silver

16” Blade Height (without snow flap)

2-Sided 3/16” Grade 50 Steel Wear Bar attached with Grade 8 Bolts

Fully Adjustable HEAVY-DUTY Skid Pads

Snow Flap NOT included on 54” or 60” ATV Blades (sold separately)

Snow Flap included on 66” and 72” UTV Blade

66” and 72” UTV Blade includes added gusseting and support

KFI Plow Base/Push Tube Systems Specifications:

Easy-Pull Lever for Blade Adjustment

Multi-Position Plow Lift Bracket

(6) Blade Pitch Adjustments (in 5º increments)

Heavy Duty 1/4” Grade 50 x 1-1/2” diameter Pivot Bushings

Heavy Duty 5/16” Grade 50 x 6” diameter Blade Angle Bushing

Shot Blasted before powder coating

Powder Coated TOUGH – Black

UTV FRONT-Mount System

Uses (2) 5/8” Pins to mount

3/8” Grade 50 Attachment Bracket

30”+ (or greater) lift height

(3) Position Blade, Up to 25º to either side

ATV MID-Mount System

Uses (2) 3/8” Pins to mount

Integrated Manual Lift brackets

1/4” Grade 50 Attachment Bracket

40-50% more lift height than the competition

Works with Cycle Country ATV Mid-Mounts

(5) Position Blade, Up to 25º to either side

Tel: 1-877-346-2050

Fax: 507-346-2010

www.kfiproducts.com

,

about